30+ years
CNC Machining
Great diversity
materials available
Own
measuring room
One-of-a-kind items
Welcome
Harderwijk
in the center of the Netherlands
What is CNC turning?
CNC turning is a machining process in which the workpiece rotates and a cutting tool shapes its contour. The machine is controlled by a CNC program based on your drawing. CNC turning is ideal for rotationally symmetric parts such as shafts, bushings, flanges, cap nuts, and hydraulic cylinders.
WHEN SHOULD YOU CHOOSE CNC TURNING INSTEAD OF MILLING?
CNC turning is the logical choice if the part is rotationally symmetric. Shafts, bushings, and flanges are typical turned parts. Milling is better suited for parts with flat surfaces, profiles, or complex 3D shapes. Not sure? Send us your drawing and we’ll help you figure it out.
Machine Specifications
MAX CROSS-SECTION
850 mm.
MAX LENGTH
3,500 mm.
TOLERANCE
Standard ±0.05 mm, precision ±0.01 mm, and finer tolerances available upon request.
SURFACE QUALITY
Ra 0.8 and finer upon request.
Materials
Steel
Structural steel S235 / S355, tool steel 42CrMo4 / 34CrNiMo6, and others upon request.
Stainless Steel
304, 316L, duplex, and others upon request.
Aluminum
6082, 7075, 5083, and others upon request.
Other
Brass, bronze, Hardox, and other materials available upon request.
Benefits
→ Single-unit orders welcome; no minimum order quantity; prototypes also accepted.
→ In-house measuring room: dimensional inspection according to drawings; measurement report available upon request.
→ Fast turnaround: in-house production and quality control.
→ Drawing-based : we work with DXF, DWG, STEP, or PDF drawings.
→ Material certificates available upon request.
→ Automation available for mass production.
Applications
→ Shafts and spindles
→ Bushings and bearing housings
→ Flanges and couplings
→ Cap nuts and locking rings
→ Hydraulic cylinders
→ Specialty threaded rods
How does it work?
Drawing
Submit a drawing (DXF, STEP, PDF).
Quote
Materials, tolerances, lead time coordination, and quotation preparation.
Production
CNC program based on your drawing.
Quality Control
Turning on CNC machines in our own workshop.
Size Check
Dimension check (in the measurement room), in accordance with the drawing.
Delivery
Delivery (including material certificate and measurement report, if requested).
Frequently Asked Questions
What is CNC turning?
CNC turning is a computer-controlled metalworking process in which the workpiece rotates while a cutting tool shapes its contour. It is ideal for rotationally symmetric parts such as shafts, bushings, and flanges.
What tolerances do you achieve in CNC turning?
We typically work to IT7 (+-0.05 mm). For precision turning, we achieve tolerances of up to +-0.01 mm, but in special cases, even higher precision is possible. Please specify your tolerance requirements in the drawing.
Can you produce one-of-a-kind turned pieces?
Yes. There is no minimum order quantity. We produce single-unit prototypes and small-batchproduction runs.
What kinds of materials do you work with?
We machine a wide range of aluminum, stainless steel, and (tool) steel. Upon request, we can also machine a wide range of other materials.
Do you provide a measurement report?
Yes. We check critical dimensions in our measurement room using a CMM. You’ll receive a measurement report if yourequest when you place your order.
What do I need to provide to get a quote?
A 2D drawing (DXF, DWG, PDF) or 3D model (STEP) with material specifications, tolerances, and the desired quantity. Don’t have a drawing or model yet? We can create one for you upon request.
Do you need a turned part based on the drawing?
Send us your DXF, STEP, or PDF files. Whether it's a single piece or a production run, we'll calculate the cost for you.